Tips From the Moving Business Pros: How to Move a Pinball Machine



With pinball making a big renewal across the country, Mild Giant wishes to make sure that these classic, gorgeous devices remain damage-free while being carried. Oh, and we want individuals moving them to be safe, too.

Initially glimpse, pinball makers can appear frightening to move because of their size, fragility, and weight. Luckily, our proficient Giants have a couple of techniques up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The majority of contemporary pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball makers had their headboxes bolted on, utilizing either two or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State devices.

Later on makers have hinges and utilize a latching system to keep the headbox upright. There may also be two bolts inside as added security, in case the lock is broken or mistakenly un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you require to remove the headbox rear access panel to get to the bolts and plugs inside. Typically this panel has a lock on it to keep it in location, however gradually the secret might have been lost. On a regular basis, there is a screw keeping this panel in place.

Once inside, remove the bolts and unplug the large ports that have electrical wiring decreasing into the maker. You might wish to identify these adapters to put them back in the right spot, but they should be different sizes, making it challenging to plug back incorrectly.

You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Ensure you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Strong State Pinballs

For early Strong State Pinballs, you will require to get rid of the back glass. There is a lock situated on the headbox in among 3 areas: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the center.

As soon as opened, get rid of the back glass by lifting it up using the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box lamp panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the lamp panel in order to swing it open.

Now that you are inside, you can remove the bolts, and any plugs that have wires going down into the machine. You may wish to label these plugs to put them back in the right area. You might not require to get rid of the plugs, as the circuitry needs to be long enough to permit the headbox to be folded down.

At this moment, you can secure the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the navigate to this website back of the device. This is an easy setup and requires no tools.

You're done if you can now fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

If you can not fold the head box down, then you need to enter. There is a lock located at the top of the back glass in the. Use the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will require to eliminate the screen panel. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Get rid of the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.

Pinball Machine legs are kept in location by 8 bolts. They will be either 5/8 inch or 9/16 inch heads. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into. These bolts can be eliminated, and the legs will come off.

These threaded plates and captive nuts can be harmed, and the usage of additional nuts may have been required. If this is the case, you will have to open the front door of the pinball, slide out the playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock across and remove the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise the playfield by placing your hand where the ball drains, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. When any nuts have been removed, change the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be adjusted differently to suit.
Filling the Pinball.

You are now all set to transfer your pinball device. Before you fill it, make certain you eliminate the pinballs so they don't bounce around during transport.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to filling the maker. Grab a good friend to assist and have one of you supporting the pinball, while the other removes the front legs. Move the maker in, and after that remove the back legs. It is much easier to fill the maker front.

Make certain you strap the pinball in, as you do not desire it moving if you have to stop suddenly!

For Electro-Mechanical pinball makers, you require to remove the headbox rear access panel to get access to the bolts and plugs within. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it might be much easier to eliminate the legs just prior to filling the device. Grab a friend to assist and have one of you supporting the pinball, while the other removes the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *